features ? 3? x 5? x 1.3? package ? 180w convection cooled power ? ideal for 1u applications ? class i and class ii versions ? universal input 90-264 vac ? approved to csa/en/iec/ul60601-1, 3 rd edition, 2 x mopp isolation ? approved to csa/en/iec/ul60950-1 2 nd edition ? efficiency 90% typical ? 3 year warranty ? rohs compliant description the MINT1180 product family is the most cost-effective medically approved supply in the market with 180 watts of convection cooled output power in 3?x5? footprint. the series comes in eight different models ranging from 12 to 48v and has been approved to iec60601-1 3 rd edition, rated for 2 mopp (means of patient protection) isolation. this new single output power supply family has both class i and ii input versions and accepts wide input range of 90 to 264vac. the typical 90% efficiency and convection cooled make this supply an excellent solution for homecare applications where the use of fans is not desired. model selection model number volts output current* minimum load ripple & noise** total regulation ovp threshold MINT1180a1275k01 12v 15.0a 0a 120mv pk-pk ? 3% 14.0 ? 1.1v MINT1180a1575k01 15v 12.0a 0a 150mv pk-pk ? 3% 18.5 1.2v MINT1180a1875k01 18v 10.0a 0a 180mv pk-pk ? 3% 21.5 2.0v MINT1180a2475k01 24v 7.50a 0a 240mv pk-pk ? 3% 29.0 2.5v MINT1180a2875k01 28v 6.40a 0a 280mv pk-pk ? 3% 33.5 2.5v MINT1180a3275k01 32v 5.62a 0a 320mv pk-pk ? 3% 36.0 3.0v MINT1180a4875k01 48v 3.75a 0a 480mv pk-pk ? 3% 56.0 3.0v notes: * total convection power is 180 watts. * * m e a s u r e d w i t h n o i s e p r o b e d i r e c t l y a c r o s s o u t p u t t e r m i n a l s , a n d l o a d t e r m i n a t e d w i t h 0 . 1 f c e r a m i c a n d 1 0 f l o w e s r c a p a c i t o r s . general specifications ac input 100-240vac, 10%, 47-63hz, 1 ? 120?370vdc turn on time less than 3 sec. @115vac & full load input current 115vac: 1.8a, 230vac: 0.9a hold-up time >16ms at 180w, 120vac
MINT1180 180w single output medical series www.slpower.com MINT1180 rev 1.4, 11-feb-13 2 general specifications (continued) inrush current 264vac, cold start: will not exceed 55a signals n/a input fuses f1, f2: 3.15a, 250vac fuses provided on all models overload protection 120%-150% of rating, hiccup mode earth leakage current < 2 7 5 a @ 2 6 4 v a c , 6 0 h z , n c ; < 4 0 0 a s f c short circuit protection provided - no damage will occur if the output is shorted, auto recovery efficiency 88% typical overvoltage protection ovp latch at 110%-130% of rated output voltage. output power 180w convection cooled switching frequency pfc: fixed, 65khz main converter: variable 35-200khz, 65-70khz at full load. transient response 5 0 0 s t y p . f o r r e t u r n t o w i t h i n 0 . 5 % o f nominal, 50% load step. ? i/ ? t <0.2a/s. max volt deviation = 3% isolation input-output: 4000vac, 2 x mopp input-ground: 1800vac, 1 x mopp output-ground: 1500vac ripple and noise see chart operating temperature -10c to +70c start up at -40c, full load output voltage see chart temperature derating derate output power linearly above 50c to 50% at 70c voltage adjustability +/- 5% from nominal storage temperature -40c to +85c minimum load not required altitude operating: -500 to 10,000 ft. non-operating: -500 to 40,000 ft. total regulation +/- 3% combined line, load and initial setting. relative humidity 5% to 95%, non-condensing vibration operating: 0.003g 2 /hz, 1.5grms overall, 3 axes, 10 min/axis non-operating: 0.026g 2 /hz, 5.0grms overall, 3 axes, 1 hr/axis shock operating: half-sine, 20gpk, 10ms, 3 axes, 6 shocks total non-operating: half-sine, 40 gpk, 10 ms, 3 axes, 6 shocks total dimensions w: 3.0? x l: 5.0? x h: 1.3? safety standards en/csa/ul/iec 60601-1, 3 rd edition en/csa/ul/iec 60950-1, 2 nd edition weight 325g mtbf 405,000 hours, 25 c, 110vac output vs. temperature derating curve 180w convection cooled, derate output power to 50% at 70 ? c. 0 50 100 150 200 -10 0 10 20 30 40 50 60 70 o u t p u t p o w e r ( w ) temperature (c) convection
|
